Table of Contents
Advertisement
7.7
JumpStart Autoprogramming
JumpStart is intended to be used prior to performing any custom programming. Each time
JumpStart is executed, all options will be reset to their default values. Do not run
JumpStart after you have configured the system through programming.
To run JumpStart:
1. Enter the installer code.
2. Press
to display the main menu.
or
3. Select
for Program Menu.
7
Display reads:
4. Select
for System Options.
6
5. Press the
or
6. Press
.
151209
IMPORTANT!
Initializing
Please wait . . .
arrow to select "Yes" from the warning screen.
firealarmresources.com
Programming
7-45
Advertisement
Table of Contents
Troubleshooting
