Table of Contents
Advertisement
16. Press
.
17. Enable group activation for a condition (see Table 7-3) by pressing the
select Y (yes) or N (no).
18. Press
.
19. Repeat steps 14 and 15 for all the activation options.
7.4.2
Add Group
To add a group:
1. Enter the installer code.
2. Press
to display the main menu.
or
3. Select
for Program Menu.
7
Display reads:
4. Press
to enter group menu.
3
5. Press
to add a group.
2
The system will assign the next available group number. Properties for the new group can
now be edited if desired (see Section 7.4.1.2). A total of 250 output groups can be defined.
7.4.3
Delete Group
1. Enter the installer code.
2. Press
to display the main menu.
or
3. Select
for Program Menu.
7
Display reads:
4. Press
to enter group menu.
3
5. Press
to delete a group.
3
A warning screen will display. If you want to proceed with deleting the group, select Yes.
To cancel, select No.
151209
Initializing
Please wait . . .
Initializing
Please wait . . .
firealarmresources.com
Programming
or
arrows to
7-17
Advertisement
Table of Contents
Troubleshooting
