Input Functions - GE GEK-106273L Instruction Manual

The following table shows the list of functions that can be assigned to each input. The table is divided into three
groups:
No definition
50PH disabled
50NH disabled
51P disabled
51N disabled
50PL disabled
50NL disabled
49 disabled
Trip disabled
Breaker 52 a
Breaker 52 b
Trip contact close
(PULSE)
Table change
Settings change disabled
Reset
(PULSE)
Oscillo trigger
(PULSE)
General input
6-40
I/O CONFIGURATION
Input not assigned
50PH trip disabled
50NH trip disabled
51P trip disabled
51N trip disabled
50PL trip disabled
50NL trip disabled
49 trip disabled
Trip of all functions is disabled
This function set means breaker close
This function set means breaker open
This function allows activating the trip output
Enabled means that the active table is T2
Disabled means that active table is the General Settings table
Enabled means that settings and active table can not be changed.
It is only possible to switch to T2 through digital input Table change
This function allows LED and output Latch reset
This function allows to activate the oscillo function
Generic function that may be used in logic configuration.
MIF Digital Feeder Protection
6.1.2.

INPUT FUNCTIONS

GEK-106273L