Table of Contents
Advertisement
Setpoint – Relay Configuration shows a dialog box to configure digital inputs, contact outputs and front panel
LEDs, as shown in Figure 4-11.
Each input, output and LED can be assigned an individual function (status bit) or an OR of a group of functions.
Functions can also be assigned to virtual inputs and outputs, in order to allow greater flexibility when creating
complex logics.
The meaning of the different columns is explained below:
* INPUT/LED/OUTPUT: Designates the respective element
* I/O configuration: the appearance and function of this column can be, depending on the state of the
respective OR checkbox column:
- OR checkbox is not checked: the element consists of a drop down list in which the user can select
the function that will activate the output or LED, or that will be activated by the input
- OR checkbox is checked: the element consists of a button that will activate a new window (see
figure 4-12) where the user can choose a sum of several functions that will activate the output or
LED, or be activated by the input. These functions are distributed in groups, and only functions in the
same group can be chosen for the same OR gate.
GEK-106273L
PRODUCT DESCRIPTION
FIGURE 4-11. RELAY CONFIGURATION SETTINGS
MIF Digital Feeder Protection
4.3.4.
RELAY CONFIGURATION
4-9
Advertisement
Table of Contents
