Rear Terminal Assignments - GE GEK-106273L Instruction Manual

PRODUCT DESCRIPTION
3.1.5.

REAR TERMINAL ASSIGNMENTS

The terminal blocks are identified by a letter located in the upper part, beside the terminal block. There are three
terminal blocks, and have been assigned the letters A, B and C respectively, in order to avoid confusions while
wiring external cables.
For each terminal block, the wiring screws (1 to 12) have been labelled with their corresponding number.
Figure 3-4 shows the location and identification of the terminals blocks at the rear of the MIF relay.
Recommended cable section: 12/16 AWG
Cable material: copper
Tightening torque: 1.2 Nm
Figure 3-4 MIF RELAY - REAR VIEW
3-26 MIF Digital Feeder Protection GEK-106273L