Connecting To A Modem; Connecting To A Remote Pc; Connecting To A Remote Ascii Terminal - Cisco IAD2430 Series Hardware Installation Manual

Remote Terminal Connections (If Applicable)

Connecting to a Modem

To connect the local modem and the remote modem to live telephone outlets, use standard telephone
cables.

Connecting to a Remote PC

To link a Cisco IAD to a remote PC, follow these steps.
The remote PC must be running terminal emulation software.
Note
Connect the remote PC and modem.
Step 1
Set the PC terminal emulation software requirements:
Step 2
•
•
•
•
•
Key in and dial the telephone number of the Cisco IAD external modem.
Step 3

Connecting to a Remote ASCII Terminal

To link a Cisco IAD to a remote ASCII terminal, such as a VT100, follow these steps:
Connect the remote ASCII terminal and modem.
Step 1
Set the terminal requirements:
Step 2
•
•
•
•
•
Step 3 Key in the telephone number of the Cisco IAD external modem, or, if you are using a Hayes-compatible
modem, enter ATDT and the number to be dialed.
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
3-32
9600 baud
8 data bits
1 stop bit
no parity
no flow control
9600 baud
8 data bits
1 stop bit
no parity
no flow control
Chapter 3 Installing Cisco IAD2430 Series IADs
OL-4234-06