Specifications; Software Elements; Configuration Connections; Configuration Methods - Cisco IAD2430 Series Hardware Installation Manual

Integrated access devices
Hide thumbs Also See for IAD2430 Series:
Table of Contents

Advertisement

Specifications

Port numbering conventions for the Cisco IAD2435 series IAD are as follows:
Specifications
For the Cisco IAD2430 series hardware and electrical speicfications, see the Cisco IAD2430 series data
sheets at the following URL:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps887/ps5321/product_data_she
et09186a008019aded.html

Software Elements

The operating system for the Cisco IAD2430 series IADs is the Cisco IOS software that resides in flash
memory.

Configuration Connections

You can use an ASCII terminal or a PC to configure a Cisco IAD2430 series IAD. The configuration can
be performed in several ways:

Configuration Methods

You can configure a Cisco IAD2430 series IAD automatically using the Simple Network-Enabled
Auto-Provision (SNAP) option, or you can configure theCisco IAD2430 series IAD manually using
several methods listed in

Automated Configuration

If your Cisco IAD2430 series IAD was ordered with the SNAP option, no on-site configuration is
required. When the Cisco IAD is powered on and connected to the WAN, the SNAP application
downloads the applicable configuration files automatically. For additional information about SNAP, see
the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/ftapiad8.htm
The SNAP option is not available on the Cisco IAD2435 IAD.
Note
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
1-10
Fast Ethernet ports are numbered 0 and 1, from left to right.
The controller T1/E1 port is numbered T1 0 or E1 0, from left to right.
FXS voice port numbering begins at 0 and reaches a maximum of 7, depending on the number of
voice ports, from left to right.
Locally, with a direct connection through the serial port
Remotely, with a connection through the serial port and a modem
Through Telnet and TFTP
"Manual Configuration" section on page
Chapter 1
Overview of Cisco IAD2430 Series IADs
1-11.
OL-4234-06

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents