Ports, Connectors, And Pinouts; Remote Terminal Connections (If Applicable) - Cisco IAD2430 Series Hardware Installation Manual

Chapter 3 Installing Cisco IAD2430 Series IADs
Figure 3-29
Connect the RJ-48 jack to the digital telephone equipment (PBX).
Step 2

Ports, Connectors, and Pinouts

Table 3-5
Table 3-5 Cable Use Reference Table
Cisco IAD Port
Console
Auxiliary
Fast Ethernet
Serial 0
T1/E1-WAN
T1/E1-PBX digital voice
Analog voice multiport

Remote Terminal Connections (If Applicable)

If you are configuring a Cisco IAD from a remote location, connect the modem and the remote PC or
terminal to the telephone network as described in this section.
OL-4234-06
Digital Voice Connection
RJ-48 T1 cable
summarizes the cable connections between Cisco IADs and the network and user interfaces.
Port Color Connector/Cable
Light blue RJ-45/rollover
Black RJ-45/rollover
Yellow RJ-45/Fast Ethernet
Blue Cisco 12-in-1 serial cable
Light green RJ-48/Straight-through
Black RJ-48/Straight-through
Gray RJ-21X/50-conductor
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
Ports, Connectors, and Pinouts
Digital PBX
or channel bank
Interface To
PC
ASCII terminal
Modem
LAN
EIA/TIA-530
EIA/TIA-530A
EIA/TIA-232
EIA/TIA-449
V.35
X.21
T1/E1 trunk
Digital PBX, T1/E1
Distribution panel for analog telephone,
fax, PBX, or central office line
3-31