Memory Structure And Title; Structure Of Snapshot And Automation Memory - Sony DMX-R100 Operating Instructions Manual

Memory Structure and Title

Structure of Snapshot and Automation Memory

Floppy disk
Title config
Snapshot
Cue
Automation
Buffer A or B
Title #10
Title #1
Title config
Snapshot
Cue
Automation
Buffer A or B
Built in flash memory
88
Chapter 4 Operation Tips
Saved into the floppy disk
Loaded from the floppy disk
SAVE
LOAD
Current title
Title config
Snapshot
KEEP
Cue
Automation
Buffer A or B
The above figure shows the memory structure of the unit.
Automation data, snapshot data and cue data created on the unit are stored,
updated and deleted on the dynamic RAM. Thus, when restarting the unit
or turning off the power of the unit, this data is lost.
To save the data that are being operated on the unit, select KEEP from the
TITLE menu which opens by touching the TITLE button on the top bar on
the window (in this manual, this operation is also called KEEP'd). Data in
the work area on the dynamic RAM is saved in the current title which is
the backup file in the flash memory. Thus, the data is not lost when
restarting or turning off the power of the unit. You can save the current
title as the title with the title number and title name on the TITLE
MANAGER window.
Also, you can initialize the title by using the CLEAR button of CURRENT
TITLE on the TITLE MANAGER window. In this case, the timecode and
the sampling frequency of the title being used are stored. However, the
remaining data items (such as automation data, snapshot data and cue data)
are cleared.
Dynamic RAM
Title config
RECALL
Snapshot
STORE
TC LINK
Cue
RECALL
Automation
WRITE
Buffer A or B
When turning on the power
Console panel/
DSP