Sony DMX-R100 Operating Instructions Manual page 109

Cases
When you execute to load or save the title
while automation is being run:
The tape recorder does not start operation
even though 2 seconds have elapsed
when MIDI controlling the tape recorder.
When you copy data between the buffers A and B:
When you execute MAKE STATIC function:
When you try to change the initial cue
while automation is being run:
There are cues to be deleted
if you change the timecode of the initial cue.
You try to create the cue with the timecode
that is a lower value than the Cue 1 value.
Dialogues and remedies
"No file access while automation is in 'RUN'."
[OK] (No action)
"Switching MIDI Machine Control to OPEN LOOP."
[OK] (Switched in open loop control
mode.)
"Are you sure you want to copy automation data?
Destination buffer will be overwritten"
[Yes] (Execute copying.)
[Cancel] (No action)
"Are you sure you want to erase automation data?"
[Yes] (Execute erasing automation data.)
[Cancel] (No action)
"Initial cue timecode value can not be changed, while
automation is in 'RUN'"
[OK] (No action)
"You are changing initial cue timecode value. Cue(s)
proceeding the initial cue timecode value will be deleted."
[Yes] (The timecode is changed)
[Cancel] (No action)
"The cue has not been stored as the timecode value is
before the initial cue."
[OK] (No action)
109
Chapter 4 Operation Tips