Dialogues On The Window - Sony DMX-R100 Operating Instructions Manual

Dialogues on the Window

In the following cases, a dialogue box appears on the window to confirm the operation and indicate the status of
the unit. Selecting the [YES] or [CANCEL] button on the box gives the result shown in parenthesis.
Cases
When you touch the DELETE button on the SNAPSHOT
window.
When you touch the DELETE button on the CUE window.
The sampling frequency or sync source changes
when you touch the CHANGE button on the
SYNC/TIME CODE window.
When you touch the CURRENT TITLE CLEAR button on
the TITLE MANAGER window.
When you try to save a title with a title which has
already been saved, on the TITLE MANAGER window.
When you try to delete a title which has already been
saved, on the TITLE MANAGER window.
When you try to load a title, on the TITLE MANAGER
window:
When the VIDEO is selected as the reference signal,
the VIDEO PLL is unlocked.
The MAIN PLL is unlocked
An error occurs when searching for a title saved
on the floppy disk.
Dialogues and remedies
"Are you sure you want to delete the selected snapshot?."
[Yes] (The snapshot is deleted.)
[CANCEL] (Cancels the deletion.)
"Are you sure you want to delete the selected cue?"
[Yes] (The cue is deleted)
[CANCEL] (Cancels the deletion.)
"Are you sure you want to change the FS or sync source?
The current title will be lost, if you continue."
[Yes] (The FS or sync source is changed,
and the unit restarts automatically.)
[CANCEL] (No action)
"Are you sure you want to clear the current title?"
[Yes] (The current title is cleared.)
[CANCEL] (No action)
"Are you sure you want to overwrite the saved title?"
[Yes] (The title is overwritten.)
[CANCEL] (No action)
"Are you sure you want to delete the title?"
[Yes] (The current title is deleted.)
[CANCEL] (No action)
"Are you sure you want to load the title?
The current title will be overwritten, if you continue."
[Yes] (The title is loaded.)
[CANCEL] (No action)
"Video PLL unlocked."
[Yes] (The dialogue is closed.)
Remedy: Confirm that the correct reference video
signal is inputted and the video signal path is
correctly terminated.
"MAIN PLL unlocked."
[Yes] (The dialogue is closed.)
Remedy: Confirm that the signal selected as the
SYNC source is inputted correctly.
"There are no titles or this is an unformatted disk.
Check the media in the floppy disk drive."
[Yes] (The dialogue is closed.)
Remedy: Ignore the dialogue when the disk is
already formatted and no title is saved on it. In any
other case, format the floppy disk.
107
Chapter 4 Operation Tips