Control Signal Connectors - Sony DMX-R100 Operating Instructions Manual

Control Signal Connectors

For connection examples, see page 7, for detailed
information on connectors, see "Specifications" on page
110, and for signal flow, see "Block Diagram" on page 121.
Control signal connectors (part 1)
1 FOOT SW connector (Phone jack)
Connect the foot switch (not supplied) to control the
remote automation functions.
2 TIME CODE connectors (XLR 3-pin)
IN connector: Inputs the timecode signal from an
external device.
OUT connector: Outputs the timecode to an external
device.
3 PC PORT connector (Mini DIN 8-pin)
Connect the host computer.
4 REMOTE connectors (D-sub 9-pin)
IN connector: For expansion use in future.
OUT 1/2 connectors: Used for connecting to an
external device such as VTR. You can control the 9-pin
devices using the transport control keys on the
automation panel.
1 FOOT SW connector
2 TIME CODE connectors
3 PC PORT connector
PUSH
OUT 2
FOOT SW TIME CODE PC PORT
5 MIDI connectors (DIN 5-pin)
MTC connector: Inputs the MTC (MIDI timecode)
used in automation operation.
MIDI IN connector: Used for connecting incoming
MIDI data, including remote control of faders, pan,
cuts and snapshots, functions depend on the settings of
the MIDI window.
MIDI OUT connector: Used for outgoing MIDI
messages, including MIDI machine control and front
panel tallies (faders, cuts and pan).
MIDI THRU connector: Outputs the signal input
from the MIDI IN connector via a buffer.
Chapter 2 Locations and Functions of Parts and Controls
4 REMOTE connectors
5 MIDI connectors
THRU OUT
OUT 1 IN
REMOTE MIDI
IN MTC
29