Osc/Talkback Window - Sony DMX-R100 Operating Instructions Manual

Menu Windows

OSC/TALKBACK Window

To open this window, perform one of the following:
• Touch the AUDIO button on the bottom menu bar,
then select "OSC/TALKBACK".
• Press the SETUP button on the Talkback panel on
the unit.
1 OSC (oscillator) tab
Touch this tab to set up the oscillators.
3 TALKBACK tab
Touch this tab to set up the settings for talkback
system.
62
Chapter 3 Menu
6 FREQUENCY SET
buttons/GANG button/
display window
This window allows you to operate oscillators and
talkback functions.
7 LEVEL SET buttons/GANG
button/display window
When selecting the OSC tab
When the OSC tab 1 is selected, buttons 2 and 5
act as setting buttons for oscillators.
2 ON (Oscillator signal output ON/OFF) button
When the button is ON, the oscillator signal is sent to
the signal path. Select the signal path for the oscillator
signal output using the Output select buttons 5.
When the button is OFF, the oscillator signal is not
outputted.
1 OSC tab
2 ON button
3 TALKBACK tab
4 MEMORY button
5 Output select buttons