Automation Function - Sony DMX-R100 Operating Instructions Manual

Another audio characteristics
Characteristics Specifications
Line input (LINE IN to PGM OUT)
Frequency response
Mic input (MIC IN to PGM OUT)
Harmonic distortion Line input (LINE IN to PGM OUT)
Mic input (MIC IN to PGM OUT)
Noise level Mic input
Mic input
Crosstalk Between input and output channels
Dynamic range Line input (LINE IN to PGM OUT)
24-bit, 128 oversampling
A to D converter
24-bit, 128 oversampling
D to A converter
Total delay 2.5 ms (Between LINE IN and PGM OUT)Fs = 48 kHz

Automation Function

Contents
Item
Title Contents of title
Number of title configuration
Number of snapshot automation
Storage
Title configuration Contents of title configuration
Snapshot automation Number of snapshots
Number of MIDI events
Number of cue points
Number of events per cue point
Size of snapshot
Memory
Time accuracy of cue linked event
Contents of snapshots
Dynamic automation Buffer size
Number of temporary buffers
Event size
Memory
Time accuracy
Contents of dynamic automation
Fader resolution
a) When you turn off the power of the unit, or start the unit without performing KEEP operation, the automation
data will be cleared.
20 Hz to 20 kHz, ±0.2 dB
20 Hz to 20 kHz, ±0.3 dB
0.01 %, at + 4 dBs, 1 kHz
0.1 %, at - 60 dBs, 1 kHz
-104 dBu, 600 terminated (-80 dB , 4 dB standard)
-126 dBu, 150 terminated
90 dB at 1 kHz
104 dB
Title configuration, snapshot automation, mix (saved dynamic
automation)
1
1
Built-in flash memory or floppy disk
FS, Initial snapshot, Timecode mode, Output
99 max.
99 max.
99 max.
1
8 kbyte/snapshot
a)
Dynamic RAM
± 2 frames
Input router, delay, phase, trimming, input mode, filter, equalizer,
dynamics, pan, assign, cut, fader, AUX
1 M byte
2 (A and B)
12 bytes/effective frame (min)
Dynamic RAM a)
± 2 frames
Filter, equalizer, dynamics, pan, assign, cut, fader, AUX
a)
10-bit (1024 steps)
113
Appendix