Sony DMX-R100 Operating Instructions Manual page 56

Menu Windows
The display of the block list buttons corresponding to
SLOT 1 to SLOT 4 depends on the board inserted.
• When the DMBK-R101 is inserted: SLOTxADC1 to
8
• When the DMBK-R102 is inserted: SLOTxDAC1 to
8
• When the DMBK-R103 is inserted: SLOTxDIO1 to
8
• When the DMBK-R104 is inserted: SLOTxSRC1 to
8
• When the DMBK-R105 is inserted:
SLOTxINSERT1 to 8
• When the DMBK-R106 is inserted: SLOTxADAT1
to 8
• When the DMBK-R107 is inserted: SLOTxTDIF1 to
8
4 DEFAULT button
Touch this button to reset the setting of the input
matrix to the default.
Assigning the input source
1
Touch the source select button.
The block list opens.
2
Touch the desired source block on the block list.
The list of the sources included in the block opens.
If you want to assign all 8 sources to 8 adjacent
processing channels, go to step 4.
3
Touch the desired source on the source list.
4
Touch the desired destination select button to
select the destination processing channel to which
the source signal is to be routed.
The source signal selected in step 3 is
automatically routed to the destination processing
channel. When you want to assign a complete
block, simply select the block as is in step 2, then
touch the first destination processing channel.
Example: When you select ANALOG IN 1 to 8 as
a block, if you touch this button of CH-3, the
source signals of ANALOG IN 1 to 8 are routed to
CH-3 to CH-10 respectively.
56
Chapter 3 Menu
Resetting the input matrix to the default
setting
1
Touch the DEFAULT button.
A dialog box appears.
2
Touch [OK] in the dialog box.
The setting of the input matrix is reset to the
default setting.
For detailed information on the contents of the default
setting, see page 90.