Sony DMX-R100 Operating Instructions Manual page 23

4 SOLO MODE section
Changes the function of the channel SOLO buttons.
SOLO button: When this button is lit, the SOLO
buttons on the channel strip panel function as
'destructive solo' buttons and cause all other channels
to cut.
For detailed information on how to set SOLO disabled, see
"SOLO buttons" on the MONITOR window on page 61.
Note
The solo mode affects both monitoring and the mix
output. The solo mode can be used for stereo pan and
surround sound MTR bus monitoring.
AFL (after-fader listening) button: When this button
is lit, the SOLO buttons on the channel strip panel
function as the AFL buttons. The AFL signal is sent to
the monitor, regalrdless the settings in the FADERS
section.
PFL (pre-fader listening) button: When this button
is lit, the SOLO buttons on the channel strip panel
function as the PFL buttons. The PFL signal is sent to
the monitor, regardless the settings in the FADERS
section.
CANCEL button: Provides an automatic method of
cancelling all SOLO'd channels (set in SOLO mode).
FADER
CUT
PAN
CUT
PAN
SOLO
LOGIC
5 HEADPHONES control
Adjusts the volume of the headphones.
PGM
AFL
SOLO SW
PFL
AFL/PFL
SOLO MODE
MTR
SOLO
Chapter 2 Locations and Functions of Parts and Controls
23