Recording Patrol; Figure 41 Recording Patrol - Honeywell 35 Series User Manual

Patrol Management
Add patrol: Set the patrol ID/Name/Preset/Duration(s). Click START to start record.
Click END to end record.
Click

 Click
 Click
This patrol list displays the configured patrols. Note that only one patrol can be applied
at a time.

Recording Patrol

Go to Setup  PTZ Setup  Recording Patrol.

Figure 41 Recording Patrol

and click
ZOOM: Click
FOCUS: Click
IRIS: Click
Speed [1-8]: Select the movement speed for camera view. The speed range is 1 to 8 and
the default setting is 5.
Recording Patrol Management
Add recording patrol: Set the recording patrol ID and Name. Click START to start record.
Click END to end record.
 Click
62
review your recorded patrol.
to stop the patrol review.
to remove the patrol.
: Click the buttons to move the video image up/right/down/left/45-degree tilt
to return to the home location.
to zoom out the video image, or click
to adjust the Focus setting.
and
and to adjust the IRIS setting.
review your recording
to zoom in the video image.
Honeywell 35 Series IP Cameras User Guide