6. Check the check boxes to enable Alarm record and SMTP.
7. Click SAVE.
Tampering Detection
Tampering detection identifies the camera tampering based on a set tampering
sensitivity value.
Note:
All VA functions are disabled because camera is not on home position. Click
home position before setting Tampering.
1. Go to Setup > Video Analytics > Tampering.
Figure 30 Tampering Detection
2. Check the Enable checkbox to enable tampering detection.
3. Configure the Sensitivity.
4. Configure the detection area.
•
•
5. Select the Output channel.
Honeywell 35 Series IP Cameras User Guide
Press and hold the left mouse button, and drag in the video area to draw a
detection area
Click CLEAR to delete a detection area.
to go
39