Appendix; List Of Symbols; Table 6 List Of Symbols - Honeywell 35 Series User Manual

CHAPTER
13

APPENDIX

List of Symbols

The following is a list of symbols that may appear on the camera:

Table 6 List of Symbols

Symbol
68
Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this product, it must be
sent to separate collection facilities for recovery and recycling. By separating this
product from other household-type waste, the volume of waste sent to incinerators or
landfills will be reduced, and thus natural resources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by UL (formerly
Underwriters Laboratories).
The FCC compliance logo.
This logo indicates that the product conforms to Federal Communications Commission
compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the product is alternating current.
The RCM compliance logo.
This logo indicates that the product conforms with Australian RCM guidelines.
The CE compliance logo.
This logo indicates that the product conforms to the relevant guidelines/standards for
the European Union harmonization legislation.
Honeywell 35 Series IP Cameras User Guide