6. Check the check boxes to enable Alarm record and SMTP.
7. Click SAVE.
Intrusion Detection
Intrusion Detection can be used to detect objects entering or leaving a virtual area in the
camera field of view.
The applicable scenarios of this feature can be:
• Detects when a person enters a bank vault or school after the office hours.
• Detects when a person leaves an emergency exit or fire escape, or any place that is
normally forbidden from access.
1. Go to Setup > Video Analytics > Intrusion.
Figure 31 Intrusion Detection
2. Check the Enable checkbox to enable intrusion detection.
3. Configure the Sensitivity.
4. Configure the detection area.
•
•
40
Press and hold the left mouse button, and drag in the video area to draw a
detection area
Click CLEAR to delete a detection area.
Honeywell 35 Series IP Cameras User Guide