Scan Management; Figure 39 Scan Settings - Honeywell 35 Series User Manual

IRIS: Click
Speed [1-8]: Select the movement speed for camera view. The speed range is 1 to 8 and
the default setting is 5.
Home Position Setup
SET: Click to set the current position as the home location.

RESTORE: Click to restore the home position to default.

Preset Management
Click Remove all to delete all the preset list.

Click

Click

Click

Note: Preset point 80~115 are reserved for special presets. And calling special preset 103
will run wiper once.

Scan Management

Go to Setup  PTZ Setup  Scan.

Figure 39 Scan Settings

and click
ZOOM: Click
60
and to adjust the IRIS setting.
to go to this preset.
to replace this preset with current position.
to remove the preset.
: Click the buttons to move the video image up/right/down/left/45-degree tilt
to return to the home location.
to zoom out the video image or click to zoom in the video image.
Honeywell 35 Series IP Cameras User Guide