Advertisement
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Save Management Center Configuration
Before you begin
Complete Steps 1 through 5 of
Procedure
Step 1
From the restore utility main menu, choose 6 Save Configuration.
The utility displays the settings in the configuration you are saving.
Step 2
When prompted, confirm that you want to save the configuration.
Step 3
When prompted, enter a name for the configuration.
What to do next
If you want to use the saved configuration to perform a system restore, continue with Step 7 of
Management Center to its Factory Defaults, on page
Load a Saved Management Center Configuration
You can load a previously-saved configuration to restore the management center.
Procedure
Step 1
From the restore utility main menu, choose 7 Load Configuration.
The utility presents a list of saved restore configurations. The first option, default_config, is the configuration
you last used to restore the appliance. The other options are restore configurations that you have saved.
Step 2
Choose the configuration you want to use.
The utility displays the settings in the configuration you are loading.
Step 3
When prompted, confirm that you want to load the configuration.
The configuration is loaded. If prompted, confirm the IP address assigned to the appliance's management
interface.
What to do next
To use the configuration you just loaded to restore the system, continue with Step 7 of
Center to its Factory Defaults, on page
Restore a Management Center to its Factory Defaults, on page
51.
51.
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Save Management Center Configuration
51.
Restore a
Restore a Management
61
Advertisement
