Advertisement
Schedule Weekly Software Updates
You must install the GeoDB on your system to view any geolocation details other than country or continent.
Cisco issues periodic updates to the GeoDB; to optimize accuracy of GeoDB lookups we recommend you
always use the latest GeoDB update on your system.
Before you begin
Make sure the management center can access the internet.
Procedure
Step 1
Choose System > Updates > Geolocation Updates
Step 2
Under Recurring Geolocation Updates, check Enable Recurring Weekly Updates from the Support Site.
Step 3
Specify the Update Start Time.
Step 4
Click Save.
Schedule Weekly Software Updates
Use these instructions to create a scheduled weekly task to automatically download the latest management
center software updates from Cisco. Keeping your management center software up to date ensures optimum
performance. Installing updates after they have been downloaded is your responsibility. See the
Management Center Upgrade Guide
Before you begin
Make sure the management center can access the internet.
Procedure
Step 1
Select System > Tools > Scheduling, then click Add Task.
Step 2
From the Job Type list, select Download Latest Update.
Step 3
Specify that you want to schedule a Recurring task, and establish a weekly schedule choosing appropriate
values for the Start On, Repeat Every, Run At and Repeat On fields.
Step 4
Type a Job Name, and next to Update Items, check the Software check box.
Step 5
Click Save.
Schedule Weekly Management Center Configuration Backups
To ease restoration of your management center configuration in the event of disasterous system failure, we
recommnd you schedule periodic system backups.
Before you begin
Make sure the management center can access the internet.
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
36
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
for installation instructions.
Cisco Firepower
Advertisement
