Cisco 1600 Getting Started Manual page 3

Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Figure 2: Front Panel LEDs and their States
Drive fault LED:
1
3 Power LED:
• Off—The drive is operating properly.
• Amber—Drive fault detected.
• Amber, flashing—The drive is rebuilding.
• Amber, flashing with 1-second
interval—Drive locate function activated in
the software.
• Off—There is no AC power to the chassis.
• Amber—The chassis is in standby mode.
• Green—The chassis is in main power mode.
Power is supplied to all components.
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Front Panel LEDs and their States
Drive activity LED:
2
• Off—There is no drive in the drive tray (no
access, no fault).
• Green—The drive is ready.
• Green, flashing—The drive is reading or
writing data.
4 Unit identification LED:
• Off—The unit identification function is not
in use.
• Blue, flashing—The unit identification
function is activated.
3