Advertisement
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Step 2
To obtain your license, navigate to
Key (for example, 66:18:E7:6E:D9:93:35) and the PAK.
Note
Step 3
Follow the on-screen instructions to generate a license or licenses, which will be emailed to you.
Step 4
Paste the license or licenses in the validation box and click Add/Verify.
Configure Management Center Administrative Settings
After you complete the initial setup process for the management center and verify its success, we recommend
that you complete various administrative tasks that make your deployment easier to manage. You should also
complete any tasks you skipped during the initial setup, such as licensing. Establish these configurations using
the default admin account or another account with Administrator access.
For detailed information on any the tasks described in the following sections, as well as information on how
you can begin to configure your deployment, see the
Guide
Log In to the Management Center Web Interface as an Administrator
If you have not already logged into the management center web interface to perform initial setup, you need
to do so to configure the management center administrative settings. Use the default admin account, or if you
have already created additional user accounts, use an account with Administrator access.
Users are restricted to a single active session. If you try to log in with a user account that already has an active
session, the system prompts you to terminate the other session or log in as a different user.
In a NAT environment where multiple management centers share the same IP address and are differentiated
by port numbers:
• Each management center can support only one login session at a time.
• To access different management centers, use a different browser for each login (for example Firefox and
Procedure
Step 1
Direct your browser to https://ipaddress_or_hostname/, where ipaddress or hostname corresponds to your
management center.
Step 2
In the Username and Password fields, enter your user name and password.
Step 3
Click Login.
If you ordered additional licenses, you can enter the PAKs for those licenses at the same time,
separating them with commas.
for your software version.
Chrome), or set the browser to incognito or private mode.
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Configure Management Center Administrative Settings
https://www.cisco.com/go/license/
Cisco Secure Firewall Management Center Administration
where you are prompted for the License
29
Advertisement
