Advertisement
Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
• Generate the necessary product license registration token from CSSM. See
Procedure
Step 1
Choose System > Licenses > Smart Licenses > Register.
Step 2
Paste the token you generated from CSSM into the Product Instance Registration Token field. Make sure
there are no empty spaces or blank lines at the beginning or end of the text.
Step 3
Decide whether to send usage data to Cisco.
• Enable Cisco Success Network is enabled by default. You can click sample data to see the kind of
• For Versions 6.5+: Enable Cisco Proactive Support is enabled by default. You can review the kind
Step 4
Click Apply Changes.
What to do next
When you add the threat defense managed devices to the management center, select the appropirate licenses
to apply to the devices. See
Configure Classic Licensing
The management center itself does not require licenses, but 7000 and 8000 Series, ASA FirePOWER, and
NGIPSv devices require that you purchase and enable Classic Licenses before you can use licensed features
on those devices. Devices that use Classic Licenses are sometimes referred to as Classic devices.
You manage Classic Licenses using the Cisco Product License Registration Portal at
license. Visit
portal. You will need your account credentials to access these links.
Note
Registration Token for Smart Licensing, on page
accessible from the machine from which you will access your management center.
data Cisco collects. To help you make your decision, read the Cisco Success Network information block.
of data Cisco collects in the link provided above the check box. To help you make your decision, read
the Cisco Support Diagnostics information block.
• When enabled, Cisco Support Diagnostics is enabled in the threat defense devices in the
Note
next sync cycle. The management center sync with the threat defense runs once every 30
minutes.
• When enabled, any new threat defense registered in this management center in the future
will have Cisco Support Diagnostics enabled on it automatically.
Add Managed Devices to the Management Center, on page
https://slexui.cloudapps.cisco.com/SWIFT/LicensingUI/Quickstart
This document provides a streamlined version of the instructions for configuring Classic Licensing, useful
for customers already familiar with process. If you are new to Classic Licensing, or if you need to configure
Classic Licensing for an air-gapped deployment or a deployment using multitenancy, see the
Firewall Management Center Administration Guide
Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide
Configure Classic Licensing
Obtain a Product License
32, including all prerequisites. Make sure the token is
for information on using the
for your version.
38.
https://cisco.com/go/
Cisco Secure
33
Advertisement
