Honeywell BC-200 Operation, Installation & Programming Manual page 80

Panel Operation
7.3.7.7 S
ERVICE
The following screens are used for printing hard copies of information to a serial printer connected to CONN1 on
the back of the CPU board.

Please refer to global settings menu on page 75 for enabling / disabling event printing options.

Please refer to page 114 for information on printer port settings and cable requirements.
PRINT MENU
DAY MODE
20 JULY 2002 14:44:37
USE UP/DOWN BUTTONS TO SELECT A FUNCTION
1) ALARM LIST ..... PRINT CURRENT ALARMS
2) FAULT LIST ..... PRINT CURRENT FAULTS
3) ISOLATE LIST ... PRINT CURRENT ISOLATES
4) ACTIVE LIST .... PRINT CURRENT ACTIVES
5) HISTORY ........ PRINT HISTORY
6) SCRIPT ......... PRINT CONTROL SCRIPTS
7) ANALOG ......... PRINT ANALOG DEVICES
8) RING MODULES ... PRINT NAMED CONV MODULES
WARNING!! BEFORE SELECTING ANY OF THE
PRINTING FUNCTIONS, MAKE SURE THAT THE
EXTERNAL KEYBOARD IS DISCONNECTED.
UP DOWN
Warning!! Before selecting any of the printing functions, make sure that the external
keyboard is disconnected or the panel may re-boot
Selection
Alarm List
Fault List
Isolate List
Active List
History
Scripts
Analog
Ring Modules
BC-200 Manual – P/N DOC-01-013
M – P
ENU RINT
A = 0
F = 0
I = 0
N = 1
SELECT BACK
STOP
Result
Prints all Alarm events currently on the system.
Prints all points currently in fault on the system.
Prints all Isolated points on the system.
Prints all Non-Alarm points which are currently active on the system.
Prints system history with the following options for printing:

All Alarm in Ascending Date Order.

All Faults in Ascending Date Order.

All Isolates in Ascending Date Order.

All Active events in Ascending Date Order.

All history events starting from a selected date.
Prints all output points which are operated by scripts.
Prints all installed Analog addressable points. This option also prints the
% compensation and maximum value reached since last reset for Analog
detectors.
Prints all installed modules on rings 1 & 2.
Actions:

Use the UP and DOWN buttons to scroll through
options and then use the SELECT button to
select the highlighted option
(or button 1 to 8 from the numeric keypad)

Press the MENU button to return to the service
menu screen.
80