Honeywell BC-200 Operation, Installation & Programming Manual page 31

Panel Operation
7.3.3.5 S
ERVICE
This list will display all current pre-alarms. A pre-alarm will sound the local panel buzzer however this function can
be disabled from the Global System options screen (refer to Section 7.3.7.1).
PREALARM LIST
DAY MODE
20 JULY 2002 14:44:37
TIME TYPE
20 JULY 10:00 SMOKE
L1D1 PENTHOUSE
20 JULY 12:15 HEAT
L1D2 STAIRWELL
PREV NEXT
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
BC-200 Manual – P/N DOC-01-013
M – L
ENU IST
A = 0
F = 0
I = 1
N = 2
STATUS NUMBER
ACTIVE 1 OF 2
ISOL ACTIVE 2 OF 2
ACKN RESET ISOL
– P A
RE LARM
Actions:

Use the PREV and NEXT buttons to scroll
through the list.

Use ACKN to acknowledge currently selected
active pre-alarm point.

Use RESET to reset the currently selected pre-
alarm point.
You will be asked to press ACKN to confirm, press
any other button to abort.

Use ISOL to isolate the currently highlighted active
Pre-Alarm point.
You will be asked to press ACKN to confirm, press
any other button to abort.
31