Honeywell BC-200 Operation, Installation & Programming Manual page 41

Panel Operation
7.3.3.8 S
ERVICE
This screen will display a list of all installed rings.
RING LIST
DAY MODE
20 JULY 2002 14:44:37
ACTIVE RINGS DETECTED:
RING 1 (CONVENTIONAL)
RING 3 (ANALOG)
RING 4 (NETWORK)
USE UP/DOWN BUTTONS TO SELECT A RING:
UP DOWN
7.3.3.8.1 S
ERVICE
Once you have selected the ring, the following screen will appear.
MODULE LIST
DAY MODE
20 JULY 2002 14:44:37
MODULES FOUND ON RING 1
001 002 003 004 005 006 007 101 102 103
USE BUTTONS TO SELECT A MODULE:
PREV NEXT
Note: If the module number is displayed with an asterisk (*) beside it, it means the module has been manually
programmed in but never "seen" by the panel.
BC-200 Manual – P/N DOC-01-013
M – L – L
ENU IST
A = 0
F = 0
I = 0
N = 0
SELECT BACK
M – L – L
ENU IST IST
A = 0
F = 0
I = 0
N = 0
SELECT
– R
IST ING
Actions:
Use the UP and DOWN buttons to scroll through the
list of active rings.
Use the SELECT button to select the currently
highlighted ring.
– R – M L
ING ODULE
Actions:
Use the PREV and NEXT buttons to scroll through
the list of active modules.
Use the SELECT button to select the currently
highlighted module.
If the Analog addressable ring (#3) is selected, you will
be taken directly to the List – Analog screen (see page
33)
IST
41