Honeywell BC-200 Operation, Installation & Programming Manual page 44

Panel Operation
7.3.3.10 S
ERVICE
This screen will list all the digital outputs (relays) in the system. Digital outputs consist of local panel relays, field
module relays, expansion relays (XRnn) and annunciator outputs.
The display shows the point number (Ring.Module.I/O format) and the point description. In addition, the current
state of the point is displayed. Unnamed points use the associated field module type as their description.
DIGITAL OUTPUT LIST
DAY MODE
20 JULY 2002 14:44:37
USE UP/DOWN BUTTONS TO SELECT AN O/P:
00.004.01 BELL OUTPUT
00.004.O2 WARNING SYSTEM
00.004.O3 A/C TRIP
00.004.O4 (LOCAL RELAY)
00.004.O5 GENERAL ALARM OUTPUT
00.004.O6 COMMON FAULT OUTPUT
00.004.O7 COMMON ISOLATE OUTPUT
00.004.08 (LOCAL RELAY)
01.001.O1 LEVEL 1 OUTPUT
01.001.O2 LEVEL 2 OUTPUT
01.001.O3 LEVEL 3 OUTPUT
01.001.O4 (AZM8)
01.002.O1 (AZM8)
01.002.O2 (AZM8)
01.002.O3 (AZM8)
01.002.O4 (AZM8)
UP DOWN TEST
In the above example, the following abbreviations of STATUS apply.
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
BC-200 Manual – P/N DOC-01-013
M – L – L
ENU IST
A = 0
F = 2
I = 1
N = 0
x
x
CHANGE BACK
Status
Abbreviation
I
F
X
– D
IST OUT
Actions:
Use the UP and DOWN buttons to scroll through
Output points.
When highlighting an output point, Pressing the TEST
button will take you into the test menu for outputs
where you can toggle the output on/off for testing
purposes. Please note that during this test process,
ALL script processing is paused. (Refer to Page 72
for more details on Dout test page)
Pressing the CHANGE button will take you to the
modify point screen (refer to page 60)
Pressing the BACK button will return you to the list
menu screen.
Meaning
Isolated
Fault
Activated
44