Honeywell BC-200 Operation, Installation & Programming Manual page 40

Panel Operation
7.3.3.7.2.2 Service Menu – List – List – Analog – Modules – Change
This screen will allow you to change Analog addressable module information and options on a point by point
basis. As modules can be either inputs or outputs, once the device type has been entered, the screen will change
to suit either an input or output as follows.
Input modules:
ANALOG MENU – PROG
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW
SELECTED POINT : L1M1
NAME > BREAK GLASS MAIN FOYER
DEVICE TYPE > FMM-101/MMX-1010 MINI MON
ZONE NO. > 2
ZONE TYPE > MCP
ALARMED? (Y/N) > Y
LATCHED? (Y/N) > Y
AVF? (Y/N) > N
Output modules:
ANALOG MENU – PROG
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW
SELECTED POINT : L1M10
NAME > EWIS OUTPUT #1
DEVICE TYPE > FRM-1/CMX-2 RELAY O/P
Once the output module name and type has been saved, you will then be transferred to the script entry screen
and be prompted to enter a script for the output. Please refer to page 90 for more information on entering scripts.
BC-200 Manual – P/N DOC-01-013
A = 0
F = 0
I = 0
N = 0
ESC BACKSP
ENTER
A = 0
F = 0
I = 0
N = 0
ESC BACKSP
ENTER
Actions:

Press the BACKSP button to delete an incorrect
character.

Press the ENTER button to step through options.

Press the YES or NO buttons when highlighted
to answer Y/N options.
Use external QWERTY keyboard to edit descriptors
and zone types. Tab will scroll through the fields.
The numeric keypad can be used for number entries
only.
When entering device type, an option pick list will
appear at the bottom of the screen.
Refer to appendix for more information on options.
You will be prompted Yes/No to save changes when
finished.
Actions:

Press the BACKSP button to delete an incorrect
character.

Press the ENTER button to step through options.

Press the YES or NO buttons when highlighted
to answer Y/N options.
Use external QWERTY keyboard to edit descriptors
and zone types.
The numeric keypad can be used for number entries
only.
When entering device type, an option list will appear at
the bottom of the screen.
Refer to appendix for more information on options.
You will be prompted Yes/No to save changes when
finished.
40