Honeywell BC-200 Operation, Installation & Programming Manual page 32

Panel Operation
7.3.3.6 S
ERVICE
This list will display the systems display zones and provide the ability to edit the zone name and view
membership. The zone names as listed will be exactly how they display on the Fire Fighters screen (up to 28
characters maximum). Editing the members of a zone must be performed from the edit points menu.
ZONE GROUPS LIST
DAY MODE
20 JULY 2002 14:44:37
USE UP/DOWN BUTTONS TO SELECT A ZONE:
ZONE1: LEVEL 1 COMMON AREAS
ZONE2: FIRE CONTROL ROOM
ZONE3: LEVEL 1 BATHROOM
ZONE4: LEVEL 1 BALLROOM
ZONE5: LEVEL 2 COMMON AREAS
ZONE6: LIFT MOTOR ROOM
ZONE7: UNNAMED POINT
ZONE8: UNNAMED POINT
ZONE9: UNNAMED POINT
ZONE10: UNNAMED POINT
ZONE11: UNNAMED POINT
ZONE12: UNNAMED POINT
ZONE13: UNNAMED POINT
ZONE14: UNNAMED POINT
ZONE15: UNNAMED POINT
ZONE16: UNNAMED POINT
UP DOWN
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
7.3.3.6.1 S
ERVICE
On this screen you can edit a zones name by using the external QWERTY keyboard. Press enter when done.
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
SELECTED POINT: ZONE 3
NAME: > LEVEL 1 BATHROOM
POINT TYPE >
AVF? (Y/N) > N
DEVICES IN ZONE
L1D1 L1D2 LID3
OVERWRITE MODE
BC-200 Manual – P/N DOC-01-013
M – L
ENU IST
A = 0
F = 0
I = 0
N = 0
CHANGE BACK
M – L – L
ENU IST IST
A = 0
F = 0
I = 0
N = 0
LID4 LID5 L1D6
Use TAB to move around.
INS, DEL to edit lines.
ENTER accept line and/or
Skip to next item.
ESC to leave without
change.
ESC BACKSP ENTER
– L – Z
IST ONE
Actions:

Use the UP and DOWN buttons to scroll through
the zone list.

Use the CHANGE button to edit a zone name and
to view its membership.

Use the BACK button to return to the previous
screen.
– Z – C
ONE HANGE
Actions:

Edit the zone name using the QWERTY keyboard.
Press ENTER when done.

To abandon changes press ESC
Note: Adding/deleting points in the zone is done by
editing the individual point configuration.
32