Honeywell BC-200 Operation, Installation & Programming Manual page 64

Panel Operation
7.3.5.1.6 S
ERVICE
Once you have selected an Analog addressable point from the list or entered directly, you will be on modify
Analog point screen. This screen will be different depending on what type of Analog addressable point is selected.
I.e. Detector, Input Module or Output Module.
Detectors:
ANALOG MENU – PROG
DAY MODE
20 JULY 2002 14:44:37
SELECTED POINT : L1D1
L1D1 > APARTMENT 1 BATHROOM
DEVICE TYPE > PHOTO
ZONE NO. > 2
ZONE TYPE > SMOKE
ALARMED? (Y/N) > Y
LATCHED? (Y/N) > Y
AVF? (Y/N) > N
SENSITIVITY 1-9: (1 is most sensitive)
Day Alarm 5
Night Alarm 1
BC-200 Manual – P/N DOC-01-013
M – C
ENU ONFIG
A = 0
F = 0
I = 0
N = 0
Day Pre-Alarm 4
Night Pre-Alarm 1
BACKSP
ENTER
– C – A
HANGE NALOG
Actions:
Press the BACKSP button to delete an incorrect
character.
Press the ENTER button to step through options.
Press the YES or NO buttons when highlighted to
answer Y/N options.
Use external QWERTY keyboard to edit descriptors
and zone type.
The numerical keypad can be used for numerical
entries.
When entering device type a numerical pick list will
appear at the bottom of the screen.
Refer to appendix for more information on options and
sensitivity settings.
You will be prompted Yes/No to save changes when
finished.
P
OINT
64