Honeywell BC-200 Operation, Installation & Programming Manual page 62

Panel Operation
7.3.5.1.4 S
ERVICE
Once you have selected the Virtual Point you wish to change you will be in the "Modify Point" screen as follows:
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW:
SELECTED POINT: VP1
NAME. >
ALARMED? (Y/N) >
LATCHED? (Y/N) >
Use TAB to move around.
INS,DEL to edit lines.
ENTER accept line and/or
skip to next item
ESC to leave without change.
Overwrite mode
You will then be prompted to enter a control script for the point as follows:
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW:
SELECTED POINT: VP1
'VP1' OPERATES WHEN:
\ >
Enter condition using local Zones and/or Points
or remote Net Points with node number (N1,NP2)
Operators: 'AND','OR','!','T','ANY[ ]', TIM[ ]
Overwrite mode
Note: If the Selected Point already has data, the existing data will be displayed. This data may be modified by
overwriting, or can be confirmed by just pressing the ENTER button for the field (using the soft or hard
buttons, or the Enter key on the keyboard).
Overwrite/Insert mode can be toggled by pressing the Insert key on the QWERTY keyboard.
BC-200 Manual – P/N DOC-01-013
M – C
ENU ONFIG
A = 0
F = 0
I = 0
N = 0
ESC
BACKSP ENTER
A = 0
F = 0
I = 0
N = 0
ESC BACKSP ENTER
– V P L
IRTUAL OINT
Actions:
Use the external keyboard to enter a descriptor (up to
28 characters) for the output and press the
ENTER button.
You will then be prompted to accept, press YES to
accept or NO to redo.
ESC will take you back to the previous screen.
Actions:
Type in the control script you wish the point to be
controlled by and press ENTER
The BC-200 will then check the syntax, report any
errors and give you the option to accept Yes/No.
Press YES or NO as appropriate. See page 90 for
more information on entering control scripts.
ESC will take you back to the previous screen.
IST
62