Honeywell BC-200 Operation, Installation & Programming Manual page 33

Panel Operation
7.3.3.7 S
ERVICE
This menu will list all Analog addressable loops (1 – 4), you can then select detectors or modules, then read
status or change or test a point.
ANALOG LIST - LOOP
DAY MODE
20 JULY 2002 14:44:37
1) LOOP 1
2) LOOP 2
3) LOOP 3
4) LOOP 4
USE BUTTONS/NUMBERS TO SELECT LOOP
ZONE 1, KITCHEN LEVEL 6
UP DOWN
Once you have selected the loop you will be prompted to select detectors or modules as follows:
ANALOG LIST – DETECTOR/MODULE
DAY MODE
20 JULY 2002 14:44:37
SELECT DEVICE ON LOOP 1:
1) DETECTOR
2) MODULE
USE BUTTONS/NUMBERS TO SELECT DEVICE
UP DOWN
BC-200 Manual – P/N DOC-01-013
M – L – L
ENU IST
A = 0
F = 0
I = 0
N = 0
SELECT BACK
A = 0
F = 0
I = 0
N = 0
SELECT BACK
– A
IST NALOG
Actions:

Use the UP and DOWN buttons to scroll through
the Analog loop list.

Use the SELECT button to select the loop to list.

Alternatively press 1 through 4 .
Actions:

Use the UP and DOWN buttons to select option.

Use the SELECT button to select the loop to list.
33