Honeywell NOTIFIER SFP-5UD Series Manual page 63

Master Programming Level
Description
INPUT ZONE #
1=ADJECTIVE/NOUN
2=DESCRIPTION
Edit Input Zone Screen #4
A flashing cursor will appear at the first asterisk to the left. The programmer can enter additional descriptive information about the
device being programmed. This information will appear on the display along with the standard device label information.
A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric characters from the keypad, repeatedly press the
appropriate key until the desired character is displayed in the first position. For example, to enter the letter B, press the 2 (ABC) key three
times to toggle through the characters 1, A, and B. Press the right arrow key to move the cursor one position to the right and repeat the
process to enter the next character. To enter a space, press the * (QZ) key four times until a blank appears in the desired position. When
all characters have been entered, press the Enter key to store the information. The display will return to the Edit Input Zone Screen #4,
displaying the new information at the bottom of the screen.
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
The Description selection allows the programmer to enter additional information about the zone currently
being programmed. This information will be displayed as part of the device label on the display. Pressing 2
while viewing Edit Input Zone Screen #4 will cause the following screen to be displayed:
ZONE # DESCRIPTION
PRESS ENTER IF DONE

Adjective/Noun Screen
Programming
63