6: N-Ann-Led Annunciator Module; Specifications; Mounting/Installation - Honeywell NOTIFIER SFP-5UD Series Manual

ANN-BUS Devices
The LEDs are wired as illustrated in Figure 2.26. Note that the illustration depicts only connectors P1 and P2. Wiring is identical for P3
(LEDs 21-30) and P4 (LEDs 31-40).
2.8.6 N-ANN-LED Annunciator Module
The N-ANN-LED annunciator module provides LED annunciation of general system faults and input zones when used with a compati-
ble FACP. The N-ANN-LED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input
zones.
Canadian Applications: The N-ANN-LED is supplied standard with the MS-5UD-7C and MS-10UD-7C models. It is mounted to the
dress panel included with these models.

Specifications

• Max. ANN-BUS Voltage: 24 VDC
• Max. Current:
 Alarm: 68 mA
 Standby: 28 mA
• Operating Temperature: 32
• For indoor use in a dry location only

Mounting/Installation

Install the N-ANN-LED Module as described in the documentation supplied with the annunciator.
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
Figure 2.26 ANN-I/O Board Layout
o o o o
F to 120 F (0 C to 49 C)
Installation
45