F.1 N-ANN-LED Annunciator Installation for Canadian Applications
•
The FACP is supplied with a modified dress panel and one N-ANN-LED annunciator.
•
When installing and programming the FACP, the Canadian Option must be set to ON prior to any other panel programming (refer to
"Canadian Option" on page 70 of the Programming Section of this manual).
•
If remote indicators are desired, they must be connected to the secondary ANN-BUS circuit. This requires the use of the ANN-SEC
option card.
•
The installer must write in the Date of Final Assembly on the Master Marking and Warranty Label located on the FACP backbox
door.
•
To comply with CAN/ULC-S559-04, the N-ANN-RLY option must be utilized along with the configuration shown in Figure F.2.
N-ANN-LED Annunciator
on Primary ANN-BUS
128
Appendix F: Canadian Applications
FACP
Figure F.1 Canadian FACP Configuration
Optional Secondary
ANN-BUS using
ANN-SEC Option Card.
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
N-ANN-LED
N-ANN-80C
N-ANN-I/O
N-ANN-S/PG
N-ANN-RLY