Main Menu - User Programming; 1: Password Options - Honeywell NOTIFIER NFC-50/100 Instruction Manual

Programming

3.2 Main Menu - User Programming

This screen shows the main menu for the NFC user programming options. Changes to programming require a valid password for system
login. Note that a password is NOT required to change the date/time, view the informational screens, or view the panel history.
3.2.1 Password Options
Changes to NFC programming require a valid password login. Programming changes cannot be made when there is an active event in
the system.
The default password for the NFC-50/100 is 0000.
Log In Password
It is recommended that the password be changed to increase system security. Valid passwords contain four digits from
New Password
0000-9999.
Verify New Password
Inactivity Timeout
remain idle before automatic user log out. The timeout feature helps the system protect against unauthorized programming changes.
When all programming has been successfully completed, the user must fully log out, with a green indicator at the login screen,
Log Out
to allow the system to reboot and apply the programming changes.
52
Figure 3.2 Password Options
Re-enter the new password for confirmation.
Select the amount of time, 5 minutes, 10 minutes, 20 minutes, 30 minutes, or 60 minutes, the system is allowed to
Figure 3.1 Main Menu
Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018
Main Menu - User Programming