Ul 464 Low Frequency Sounders - Honeywell NOTIFIER NFC-50/100 Instruction Manual

UL 464 Low Frequency Sounders

talk switch. ALL CALL broadcast of a stored message can be done by pressing a message button. The message buttons operate in the
same fashion as the message buttons on the NFC-50/100 main console. Not for use in UL2572 Mass Notification or Canadian applica-
tions.
NFC-LOC Local Operator Console
The NFC-LOC has a complete operator interface like the NFC-50/100 main console and is housed in its own cabinet with a keyed lock
or thumb lock (requires AHJ approval). The local operator console requires an external data bus connection, an external audio riser con-
nection, and an external operator interface power connection (24 volts DC) from the NFC-50/100 main console.
NOTE: Any combination of up to eight remote consoles comprised of NFC-RM(s), NFC-RPU(s), and NFC-LOC(s) can be used in the
system. Their external data bus addresses must be set via dip switches on each unit's PC board. Refer to Section 2.14 on page 48.
1.6 UL 464 Low Frequency Sounders
This product complies with the requirements for a low frequency sounder (520Hz) as specified in UL 464 when used as part of a system
with the following items.
Amplifiers:
Amplifier/Audio Product
NFC-50/100
NFC-50/100 with NFC-BDA-25V
NFC-50/100 with NFC-XRM-70V
NFC-50/100 with NFC-XRM-70V
and NFC-BDA-70V
NFC-50/100 with NFC-50/100DA
NFC-50/100 with NFC-50/100DA
and NFC-BDA-BU
Audio File:
The 520 Hz audio file is available for download at esd.notifier.com.
Speakers:
For a complete list of speakers that can be used in a Notifier FirstCommand system with the above specifications, refer to the current ver-
sion of the Device Compatibility document, p/n 15378.
Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018
Description
Main console
Main console with optional second 25V amplifier installed
Main console with 70V transformer installed
Main console with 70V transformer and optional second 70V amplifier installed
Main console with 50/100 watt remote amplifier (with or without internal options
listed above), 25V or 70V
Main console with 50/100 watt remote amplifier and optional backup amplifier
(with or without internal options listed above), 25V or 70V
Product Description
21