Speaker; Vibrator; Charge Led - Casio DT-X100 Service Manual

5-4-7. Speaker

No Operation
Select [Speaker].
1

5-4-8. Vibrator

No Operation
Select [Vibrator].
1

5-4-9. Charge LED

No Operation
Set DT-X100to HA-
F60IO.
(Attention)
Use a battery not fully
charge
1
Select [Charge LED].
Display
 The volume changes from small,
 The volume changes from small,
The sound time for each volume is 0.3
sec. and the sound is repeated for 4
times.
If sound from the speaker is correct: OK
If sound from the speaker is incorrect:
Failure
Pressing "1" or "0" returns you to the
Menu screen.
Display
After operating Vibrator for 3 seconds,
the result screen is displayed.
If Vibrator vibrates: OK
If Vibrator do not vibrate: Failure
Pressing "1" or "0" returns you to the
Menu screen.
Display
Check that a Charge LED lights in orange
or green.
If LED lights properly: OK
If LED does not light: Failure
Pressing "1" or "0" returns you to the
Menu screen.
— 48 —
Test Details
medium to large at frequency of 3kHz.
medium to large at frequency of
10kHz.
Press the "1" key.
Press the "0" key.
Test Details
Press the "1" key.
Press the "0" key.
Test Details
Press the "1" key.
Press the "0" key.