Table of Contents
Advertisement
(5) Remove the connector of the USB-WIRE-SUB-ASSY.
Open the L-CASE-UNIT by 180 degrees.
Connector
(6) Peel off the tape TAPE/CONNECTOR-B and TAPE/CONNECTOR-C that holds down the connector.
Remove the coaxial cable of the WLAN-5G-UNIT and the FFC/SUB.
(7) Assemble the removed parts by reversing the disassembly procedure.
Connect the coaxial cable of the WLAN-5G-UNIT and insert the FPC-PY055VA4-SUB.
Attach the TAPE/CONNECTOR-C to the connector. After that, attach the TAPE/CONNECTOR-B to the
coaxial cable.
NOTE: Be sure to connect the coaxial cable to the right side connector in the picture below.
Coaxial cable
TAPE/CONNECTOR-C
TAPE/CONNECTOR-B
— 19 —
FFC/SUB
Advertisement
Chapters
Table of Contents
