Casio DT-X100 Service Manual page 33

Replacing the ANT-CABLE
Peel off the TAPE/CONNECTOR-B and remove the ANT-CABLE.
NOTE: Be sure to connect the ANT-CABLE to the right side connector in the picture below.
(3) Assemble the removed parts by reversing the disassembly procedure.
NOTE: When connecting the LCD-UNIT to the
PCB ASSY/MAIN, be sure to fully insert
the FPC into the connector.
NOTE: Attach the TAPE/CONNECTOR-B to the
PCB ASSY/MAIN as shown in the right
picture.
CN-TAPE-B
ANT-CABLE
Reference position for attaching:
Center of the connector
— 30 —