Casio DT-X100 Service Manual page 26

3-2. 2D MODULE (2D model)
(1) Peel off the TAPE/CONNECTOR-B and remove the FPC from the connector.
(2) Undo 3 screws and remove the 2D-UNIT from the L-CASE-UNIT.
Screws (S3)
(3) Undo 2 screws and remove the 2D SCANNER from the 2D HOLDER.
(4) Remove the FPC/2D with the CUSHION/2D being attached to it.
(5) Assemble the removed parts by reversing the disassembly procedure.
Attach the CUSHION/2D to the connector of the 2D MODULE.
Attach the TAPE/CONNECTOR-B to the positions indicated in the picture below.
CUSHION/2D
TAPE/CONNECTOR-B
Screws (S7)
TAPE/CONNECTOR-B
Reference position for attaching:
— 23 —
CUSHION/2D
FPC/2D
Center of the connector