Cisco Catalyst X4232 Installation And Configuration Note page 54

Configuring the Module for InterVLAN Routing
To create an EtherChannel port bundle, perform this task in privileged mode:
Task
Step 1
If you are unsure which ports you can configure as
an EtherChannel, display the EtherChannel
capabilities for the module or switch you are
configuring.
Step 2 Create an EtherChannel with the desired ports.
Step 3 Verify the EtherChannel configuration.
This example shows you how to create an EtherChannel bundle and verify the configuration:
Console> (enable) set port channel 2/1-2 on
Port(s) 2/1-2 are assigned to admin group 57.
Port(s) 2/1-2 channel mode set to on.
Console> (enable) show port channel
Port
----- ---------- -------------------- ----- -----
2/1 connected
2/2 connected
----- ---------- -------------------- ----- -----
Port
----- ------------------------------- ------------------------- ----------------
2/1 069003103(5500)
2/2 069003103(5500)
----- ------------------------------- ------------------------- ----------------
Console> (enable)
Configuring the Layer 3 Gigabit Ethernet Ports
After you have configured the internal Gigabit Ethernet interfaces from the supervisor engine console,
enter the session command to access the Catalyst 4000 Layer 3 Services module prompt and configure
the internal and external Layer 3 ports on the Catalyst 4000 Layer 3 Services module for interVLAN
routing.
These sections describe how to configure the Gigabit Ethernet interfaces on the Catalyst 4000 Layer 3
Services module.
Installation and Configuration Note for the Catalyst 4000 Layer 3 Services Module
54
Status Channel
Mode
on
on
Device-ID
Command
Console> (enable) show port capabilities
[mod_num[/port_num]]
Console> (enable) set port channel port_list
[admin_group] mode {on | off | desirable | auto}
[silent | non-silent]
The silent and
Note
non-silent keywords
function only with the
auto and desirable
modes.
Console> (enable) show port channel [port_list]
Admin Ch
Group Id
57 835
57 835
Port-ID
2/1
2/2
Platform
WS-C4000
WS-C4000
78-10164-03