Configuring Ios Features - Cisco Catalyst X4232 Installation And Configuration Note

Layer 3 services module

Hide thumbs

Table of Contents

•

If a feature does not appear in the list of supported features in this document or in the list of supported

features in the Release Notes for Catalyst 4000 Family Layer 3 Services Module, that feature is not

supported on the Catalyst 4000 Layer 3 Services module.

Caution

We do not recommend that you configure unsupported features, even if you can configure

them with the CLI.

Configuring IOS Features

Standard IOS feature configurations and commands are documented in the IOS configuration guides

and command reference publications. Table 2 lists the standard IOS features supported on the Catalyst

4000 Layer 3 Services module. For information on configuring these features, refer to the online IOS

documents listed with each feature.

Table 2

Documentation Sources for Supported IOS Features

Feature

HSRP

AppleTalk and

AppleTalk access lists

Standard IPX

access lists

Standard and extended

IP access lists

78-10164-03

Named IPX SAP access lists

48-bit MAC access lists

48-bit MAC extended access lists

Integrated routing and bridging (IRB), and concurrent routing and bridging (CRB)

ISL trunking on the internal Gigabit Ethernet ports

Sources

Network Protocols Configuration Guide,

Part 1

Using HSRP for Fault-Tolerant IP Routing

(Internetworking Case Studies)

Network Protocols Command Reference,

Part 1

Network Protocols Configuration Guide,

Part 2

Network Protocols Command Reference,

Part 2

Network Protocols Configuration Guide,

Part 2

Network Protocols Command Reference,

Part 2

Network Protocols Configuration Guide,

Part 1

Network Protocols Command Reference,

Part 1

Installation and Configuration Note for the Catalyst 4000 Layer 3 Services Module

URL