Tracking; Idle Channel Noise; Single Frequency Distortion; Envelope Delay Distortion - GE JungleMUX 86445-31 Technical Practice And Installation Manual

Tracking

End-to End Tracking specifications for the 86445-32 2W FXS unit are as per the
table below.
Input @ 1kHz (dBm0)
+3 to -37
-37 to -50
-50 to -54

Idle Channel Noise

End-to-End Idle Channel Noise specification for the 86445-32 2W FXS unit is
less than 23 dBrnc0.

Single Frequency Distortion

The maximum Single Frequency Distortion for the 86445-32 2W FXS unit is
-45 dB (200Hz – 3400 Hz @ 0 dBm0).

Envelope Delay Distortion

The maximum absolute Envelope Delay for the 86445-32 2W FXS unit is 520
µsec.

Signal to Total Distortion (Signal to Noise) Ratio

End-to-End Signal to Total Distortion (Signal to Noise) ratio for the 86445-32 2W
FXS unit is provided in the table below.
Input Level (dBm0)
0 to -30
-40
-45

Table 19: End-to-End Signal to Total Distortion

Copyright  GE Multilin Inc. 2002
Max. Output Deviation (dB)

Table 18: End-to-End Tracking

342-86400-445PS
Issue 4.0
October 2006
Page 74
End-to-End
±0.25
±0.5
±3.0
S/D Min. End-to-End (dB)
35
27
22