Loopback Commands
Analog loopback can be performed for the purpose of testing and maintenance.
This lopback is explained in the previous section under Test Setup.
Troubleshooting
If an 86445-31 2W FXS unit is suspected of being defective, substitute it for a
known-good 86445-31
GE Multilin for repair or replacement.
configured correctly.
The following table is intended to provide the user with possible solutions to
problems that may be encountered during normal unit operation.
1
The 86445-32 unit may also be used as a replacement unit in which case the paddleboard must
be replaced as well (86445-32 unit requires 86445-92 paddleboard).
Copyright GE Multilin Inc. 2002
unit and if the unit functions properly return the original to
1
342-86400-445PS
Issue 4.0
October 2006
Page 35
Ensure that the substitute unit is