Grizzly ART 4032 Lion Translation Of The Original Instructions For Use page 62

GB
e) Do not overreach. Keep proper foot-
ing and balance at all times. This ena-
bles better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collec-
tion can reduce dust-related hazards.
.h) Never let children or persons who are
unfamiliar with these instructions use
the machine.
i) Stop using the machine when persons
– especially children – or pets are
nearby.
j) Use the machine only in daylight or
with good artificial lighting.
k) Always keep your hands and feet
away from the cutting equipment, es-
pecially while starting the engine.
l) Never install metallic cutting elements.
m) Prior to commissioning and after any
impact, check for signs of wear and
damages, and have any necessary
repairs performed.
n) Never use the machine with damaged
or missing protective equipment.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
62
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool
- before making any adjust -ments,
changing accessories, or storing
power tools.
- whenever the user no longer re-
mains in the vicinity of the machine.
- before the removal of blockages.
- before checking, cleaning or wor-
king on the machine.
- - after touching a foreign body in order
to check the machine for damage.
- for an immediate check if the machi-
ne begins to vibrate excessively.
Such preventive safety measures reduce
the risk of starting the power tool acci-
dentaIly.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are danger-
ous in the hands of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.