Chapter 2 - Important Safety Notices - Honeywell Experion Orion Console Installation Manual

CHAPTER
2
IMPORTANT SAFETY NOTICES
Note the following safety notices when installing and operating an
Experion Orion Console.
CAUTION: PINCH WARNING
Pinch points and other safety hazards have been designed out of
the product as much as feasible; however, they cannot be entirely
eliminated.
Special precaution should be taken when accessing the
equipment tray. The lift column function should not be used or
the work surface lowered while an operator is accessing the
equipment tray or any other part of the console under the work
surface.
To avoid pinch points and personal injury, operators should never
have their hand, arms, feet or any other part of their body resting
on the top of the equipment tray when the work surface is being
lowered. The top of the equipment tray should never be used as
an additional work surface and nothing should be placed on top
of it or over the ventilation holes.
CAUTION: ELECTRICAL AND FIRE SAFETY
To avoid injury or damage from electrical hazards:
l
l
l
Do not perform electrical work on the console without proper
training and qualifications.
Do not perform electrical work, without first disconnecting the
electrical power source. Do not disconnect power from the
console when the console is in active use, otherwise this could
result in a loss of view.
Use this console only on the power voltage that the console
was delivered specifically for: 110 V AC (for North American
regions) and 220-240 V AC (for regions outside of North
America).
Many of the power inputs and outputs of this console are
equipped with universal plugs and sockets. However, this
console contains parts where the voltage is specific to the
7